Portable power stations
In 30 seconds
A portable power station stores energy, but it does not run every appliance for the same time. Compare the Wh available, the W needed and the charging limits. Plug appliances into the station's own outlets and never use a socket in the house to power the wiring.
On this page
In a blackout, a bigger battery can keep some devices running after your power bank runs out. That can help with lighting or communications. The stored energy is still limited.
A 230 V socket on the power station does not mean it can run any appliance. Start-up power, conversion losses and the station’s own consumption can shorten the running time or stop the appliance from working.
This guide explains how to read the limits and do simple sums. For small needs, also compare batteries and power banks. For a fixed installation, see Solar power at home.
Safety
Never connect an outlet of the power station to a socket in the house to power the wiring. Do not improvise cables or connections. Fixed backup power needs assessment and installation by a qualified professional. If there is smoke or flame, get away, get out and call 112. Do not try to fight the fire or carry the burning device.Tell energy from power
- Read the Wh. Watt-hours show the nominal energy stored. They are not the number of hours any appliance will run.
- Read the W. Watts show power. Add up the power of the appliances used at the same time and check the station’s continuous limit.
- Check start-up power. A motor can need more power to start. A peak figure on the box does not guarantee an appliance is compatible.
- Allow for losses. Converting energy to 230 V and keeping the station switched on also use energy. Do not treat the whole nominal capacity as energy available at the outlets.
- Check the outlets. Confirm each port’s voltage, power and compatibility in the manual. A plug that fits does not prove the connection is suitable.
Do a sum for each appliance
Start with energy in Wh = power in W × time in hours. To estimate hours, divide the usable energy available by the consumption. Use a measurement or the maker’s information when you have it.
The values below are made-up examples to show the sum, not typical consumption or promised running times. Suppose you have 400 Wh usable for the outlets you choose. A station advertised at 500 Wh may give a different result; the 400 Wh is not a universal efficiency.
| Example | Sum | What the sum tells you |
|---|---|---|
| A phone needing 20 Wh per charge, including the losses of that charge | 400 ÷ 20 = 20 | Twenty theoretical charges, if nothing else uses that budget |
| A 10 W router for 8 hours | 10 × 8 = 80 Wh | The battery can power the router; that does not guarantee the operator’s network works |
| Two 5 W lights for 6 hours | 2 × 5 × 6 = 60 Wh | Also compare using dedicated torches |
| A fridge with a hypothetical label of 183 kWh/year | 183,000 ÷ 365 ≈ 501 Wh/day | The daily average already exceeds the example’s 400 Wh; also check start-up power |
The daily figure from the label is an average, not a constant draw. The sum helps you compare energy; it does not guarantee running time or that food will keep. Follow Fridge and freezer in a blackout.
- Add the uses together. The examples compete for the same energy. Do not count the twenty phone charges and, at the same time, all the hours of the other appliances.
- Check standby consumption. Leaving the 230 V outlet on when you do not need it can use part of the reserve. Follow the manual.
- Do not promise running time for medical equipment. For a CPAP or other medical device, talk to the maker and the doctor. Check the backup power and support plan in Older people and people who need support.
Battery, temperature and storage
- Do not choose by the acronym alone. LFP and NMC are different chemistries. Compare the test conditions, capacity, weight and cycles declared for the model. A number of cycles without the remaining capacity stated does not allow a fair comparison.
- Take the same care with LFP. It can also undergo a dangerous thermal reaction under abuse. The chemistry does not replace the precautions in Batteries and power banks.
- Read the charging range. Two manuals we checked start at 0 °C, but the maximums and conditions differ. Do not charge outside your model’s range or try to heat or modify the battery to get around a protection.
- Follow your equipment’s storage instructions. The charge level and how often to check it vary between makers. Keep it somewhere dry and away from heat, and do not apply a universal percentage.
- Check safety alerts. Look up the exact model in Safety Gate and in the maker’s notices. An alert for another model does not tell you whether yours is safe.
Charging with a solar panel
- Compare V, A and W. Respect the voltage, current and power limits of the solar input. Do not improvise adapters because the advertised power looks right.
- Expect variable output. A panel’s watts are measured under test conditions. Clouds, shade, orientation and season change the energy collected.
- Do not turn power into constant sunshine hours. A 100 W panel does not necessarily give 100 Wh in every hour of daylight. The monthly output estimated by the JRC’s PVGIS depends on the place and the set-up.
- Protect the station. Putting the panel in the sun does not mean leaving the battery in the rain or the heat. Follow the conditions of use for both.
See Solar power at home to tell a portable panel from a grid-connected system. For fuel-burning equipment and electrical connections, see Generators and gas.
Watch out for these mistakes
- Confusing W with Wh. Plenty of power available does not mean many hours of running time.
- Counting on the full label capacity at the outlets. Losses and standby consumption also use energy.
- Treating a 230 V outlet as an emergency installation. Use it only as the manual allows. Do not power the house through a socket.
- Ignoring damage because it is a big battery or LFP. Apply the same charging, damage and fire rules as for power banks.
- Depending on the battery for internet or help. Also prepare radio and communications and follow The first hour of a blackout.
Sources
- ERSE (Portuguese energy regulator) — Self-consumption: how does it work?
- E-REDES (Portuguese distribution network) — Customers with special needs and priority customers
- DGEG (Portuguese energy directorate) — Ecodesign and energy labelling
- DGEG (Portuguese energy directorate) — Activities and professionals: private electrical installations
- Scottish Fire and Rescue Service — Lithium-ion batteries
- Health and Safety Executive Northern Ireland — Safety Tips – Using a portable generator in an emergency
- EcoFlow — DELTA2 User Manual
- Anker — SOLIX C1000/C1000X Portable Power Station User Guide — A1761, UK
- Jackery Europe — Explorer 1000 V2 Basic Information — JE-1000D
- European Commission / JRC — PVGIS 5 user manual
- European Commission / DG ENER — Fridges and freezers: energy label
- Mao et al. / University of Surrey — A systematic investigation of thermal runaway characteristics of cells with different cathode materials
- Danish Business Authority, market surveillance — Use your power bank safely when charging
- UK Office for Product Safety and Standards — Product Safety Report: AFERIY Portable Power Station (2505-0172)
- European Commission / DG JUST — Safety Gate, the EU rapid alert system for dangerous non-food products
Related
Lighting without electricity
Keep torches and spare batteries somewhere easy to find. Choose battery lighting over candles. If you use a candle, keep watching it and put it out before you leave the room or go to sleep.
Batteries and power banks
Keep a charged power bank and batteries that fit your torches and radio. Charge devices while you are awake and at home, following the manufacturer's instructions. Do not use batteries that are damaged, swollen or unusually hot.
Generators and gas
Use generators only outdoors, at least 6 metres from the house and with the exhaust pointing away from openings. Switch them off and let them cool before refuelling. Do not improvise electrical connections or gas installations.