Emergency: 112 Emergency mode →

Making fire: matches, lighters, ferro rods and magnifiers

Reviewed on 2026-10-29 00:00:00 +0000 UTC 6 min read

Correct information

In 30 seconds

First check whether fire is allowed. Know the limits of matches, lighters, ferro rods and magnifiers, prepare dry material and put a permitted fire out completely before you leave.

On this page

Before you think about lighting a flame, check Firewood, bonfires and burning. The local rules and the day’s fire danger decide whether any fire is allowed, whatever you use to light it. On the mainland, check IPMA’s daily map; on the islands, also check the regional and municipal conditions and rules.

A flame can seem useful when the power is out or you are spending time outdoors, but it can also start a wildfire, cause burns or give off dangerous gases. Having a lighter, or calling the situation an “emergency”, does not exempt you from those conditions.

This guide explains how four ways of lighting a fire work and how to prepare and put out a small fire when it is allowed and the place is suitable. It does not repeat all the rules: check them in the guide linked above before you practise.

Safety

Do not light fires in forbidden periods or places, indoors or in a tent. Have water to put it out before you light it, keep watch and do not use petrol, spirits or other liquid accelerants. If you cannot guarantee the conditions for using and putting out the fire, do not light it.

Here, tinder means the small amount of dry material prepared to catch the flame or sparks. The fine material that follows feeds the flame before you add larger fuel.

Matches: protect the striker too

  • Ordinary matches depend on staying dry. Damp can stop them lighting. Keep them in a waterproof box or pouch and protect the striking surface too.
  • Windproof and waterproof matches have limits. The match and the striker are not necessarily equally resistant; a wet striker can leave the whole set useless. Check the instructions on the pack.
  • Prepare what you will light before striking. A small flame does not last long; having the tinder dry and the next material ready saves you looking for it with a lit match.

Lighters: a ready flame, if the fuel and mechanism work

  • Cold can make butane lighters struggle. The fuel vaporises poorly at low temperatures and the flame may fail. Do not warm the lighter over a flame, stove or other heat source to try to revive it.
  • Water can also stop it working. Protect the mechanism and keep the lighter dry. Do not count on it working straight away after it falls in water.
  • Check its condition. Do not use a damaged or leaking lighter. Keep it away from heat and children and follow the maker; do not improvise repairs or refills on a model not designed for them.

Common myth

A lighter always keeps working after it gets wet.

Water can stop it from sparking or stop the mechanism working; rain and wind also make it harder to use. A lighter that worked again after drying out does not prove it always works when wet. Keep it dry and know its limits before relying on it.

Ferro rod: a spark is not yet a fire

The “flint” common in kits is a ferrocerium rod, a material that throws off very hot particles when scraped. It is not the same as a piece of flint struck with steel.

  • Use the striker that came with it and follow the set’s instructions. Aim the sparks at a small amount of dry tinder, away from your body and from anything you do not want to catch fire. You do not need to use a knife edge as a striker.
  • Prepare tinder that catches from sparks. Thick wood will not catch just by pointing a spark at it. A suitable commercial tinder lets you learn without identifying plants or improvising substances.
  • Practise beforehand, where it is allowed. Pressure, the direction of the stroke and the tinder have to work together; carrying the rod does not guarantee you can light a fire in the cold or rain.

Magnifier: needs direct sun

A magnifying glass concentrates sunlight on a small area. The surface at that point heats up and can ignite suitable, dry tinder.

  • Find the smallest point of light on the tinder. Adjust the distance and hold the lens steady. It is the concentration of light, not the strength of your hand, that heats the spot.
  • Allow for the sky and the time of day. You need strong enough direct sun; it is not a solution at night or under cloud.
  • Keep it out of direct sunlight when you finish. Do not leave it focusing light on things; a lens left in the sun can start a fire.

Preparing a small permitted fire

  • Use a proper, permitted place. Choose a fire site provided for the purpose, away from tents and vegetation, with no roots or organic matter under the fire. A space that looks empty is not, on its own, a permitted place.
  • Have water ready and control the size. Only make a fire you can watch and put out; wind and sparks can carry the problem beyond the fire.
  • Separate tinder, fine material and larger fuel. Keep them dry and add material gradually, without smothering the air supply. The tinder starts the flame; the next material keeps it going.

In practice

A tip from people with field experience, not from an official source.

Before lighting, prepare the dry material and the water to put it out. Try your way of lighting it during an allowed, controlled activity; that is the moment to find out whether the striker, the tinder or your technique fails.

Putting it out completely

  1. Stop adding fuel and keep watching. Do not leave the fire to burn out on its own.
  2. Spread the embers carefully and pour water slowly. Keep your face away from the steam and avoid throwing hot material about.
  3. Stir and wet it again. The water has to reach the material that is still hot, not just the surface.
  4. Make sure no heat is left before you leave. Bring your hand close carefully, without touching the ash or embers; if you feel heat, keep wetting and stirring. Do not bury the embers: they can keep burning out of sight.

Watch out for these mistakes

  • Thinking a small flame is exempt from the rules. The way you light it does not change the day’s fire danger or a ban on the place.
  • Keeping the matches dry and the striker wet. Protect the whole set, not just the matches.
  • Mistaking sparks for lit tinder. Prepare suitable material before using the ferro rod.
  • Carrying a magnifier as your only option. Without direct sun you have no heat source.
  • Leaving when you no longer see a flame. Hot embers may remain; water, stirring and checking for heat are part of the job.

For cooking, see Camping stoves and fuels. For light, prepare lighting without electricity instead, and check the pocket kit.

Sources

Related

  • Knives: types, use and sharpening

    Use a knife for specific jobs, know the limits on carrying one in Portugal and learn to look after and sharpen the edge. A short blade does not exempt you from the rules on prohibited types and places.

  • Pocket survival kit

    Prepare a small kit to find your way, make a repair and call for help during a short emergency. Keep the contents dry and respect the rules on blades, fire and fishing.

  • Map and compass

    Learn to match a Portuguese map to the ground, set the map and follow a direction without losing sight of obstacles. Check the local declination, especially in Madeira and the Azores, and know when to stop and call for help.