Emergency: 112 Emergency mode →

Radio bands explained

Reviewed on 2026-11-04 00:00:00 +0000 UTC 2 min read

Correct information

In 30 seconds

Every radio uses a band of frequencies, and the band decides how far the signal goes. On VHF and UHF (FM radio and PMR446 walkie-talkies), the signal travels in an almost straight line and is blocked by hills and buildings: get higher and move away from obstacles. On medium wave and HF (CB and amateur radio), the signal can go much further, especially at night, but conditions change. No range is guaranteed: try your radio before you need it.

Every radio uses a range of frequencies, called a band. The band decides how far the signal reaches and what can block it. Knowing this helps you choose the right radio and understand why, in a blackout, some stations come through and others don’t.

Safety

No radio range is guaranteed. Try your radios at home and at the places you have agreed with your family before you need them. In an emergency, call 112.

The bands and the radios on this site

BandRadios in the frequency table
MF, 300 kHz to 3 MHz (includes medium wave, MW)Antena 1 on medium wave
HF (shortwave), 3 to 30 MHzCitizens band (CB, 27 MHz) and amateur radio emergency frequencies
VHF, 30 to 300 MHzFM radio: Antena 1 and local stations
UHF, 300 MHz to 3 GHzPMR446 walkie-talkies (446 MHz)

How the signal travels

  • VHF and UHF: in an almost straight line. The signal reaches a little beyond the horizon and sometimes gets around obstacles, but hills and buildings weaken or block it. The higher the antenna, the further it reaches. To reach much further, you normally need a repeater: a station on high ground that retransmits the signal. PMR446 walkie-talkies cannot use repeaters. In a disaster, repeaters can fail.
  • HF: via the ionosphere. The ionosphere is a layer of the atmosphere, high above the ground, that can reflect HF signals to other regions and countries. But conditions change with the time of day, the season and the Sun’s activity, so the same link can work in the morning and fail at night.
  • Medium wave: further at night. At night the ionosphere changes and medium wave signals reach much further. You hear distant stations, and also more interference.

What this means in practice

  • PMR446 walkie-talkies (UHF): the range depends on what is between the radios. To talk further, get higher (an upper floor, a window, high ground) and move away from walls and other obstacles. Agree with your family where and when to try to talk, using the Family radio plan.
  • FM radio (VHF): each transmitter covers the area around it. If reception is poor, move the radio to a window or a higher spot, or look for another transmitter for your area in the table.
  • Medium wave (MW): a radio with medium wave can pick up more distant stations, especially at night.
  • CB and amateur radio (HF): in some conditions, signals reach much further, but the range varies a lot. Transmitting on amateur bands requires a licence.

Sources

Related

  • Frequency table

    Where to hear public radio in your area and which channels you may use without a licence, with the legal status of each.

  • Family radio plan

    Agree with your family on a channel, a tone and times to hear each other by radio if phones fail. Fill it in, print it and keep a copy with each radio.

  • PMR446 radios: storing, testing and using them

    Use compliant PMR446 equipment, with its built-in antenna and no modifications. Agree a channel with your family, and choose and test in advance the places to talk from. CTCSS and DCS codes filter what you receive; they do not make the conversation private or connect you to the emergency services.